Click here to view the hands you can choose from

 

                 

The movements on this page are our superb EZ Quartz ® Sweep Quartz Clock Movements

The second hand on the sweep movement moves continuously and the sweep movements are therefore
quieter than ticking movements, although not completely silent

We also have EZ Quartz ® Ticking Quartz Clock Movements

If you would prefer a Ticking Movement in your repair pack

Please click here

 

 

SINGLE REPAIR PACKS
IF YOU ARE REPAIRING A CLOCK PLEASE NOTE:

Whilst clock repairing is not for everyone it is often quite easy to replace the movement
and hands. You will need to measure the clock you have to check that one of our movements
will fit and you will almost certainly find that the old hands will not fit the new movement

Please make sure you select the free set of hands and that they are shown on your order confirmation

If you are lucky and your old hands do fit then you can keep the free ones as spares!

Full instructions and dimensions of our clock movements are shown below

After ordering your movement you will be automatically transferred to our clock hands page
where all the hands we have are illustrated with their dimensions

ALL OF OUR PRODUCTS AND ALL THE INFORMATION WE HAVE ARE ON THIS WEBSITE !

If after reading this you are not happy to attempt the repair, or if you need more information or parts that
are not shown please consult your local clock repairer or jeweller, as many jewellers repair clocks

We wish to point out (very politely!) that we are not clock repairers and we can not
mend clocks or discuss individual clock repairs over the phone or by email!

If you are happy to give it a go please read the instructions below and then order here ....

 

 

Please order your clock repair pack here

Please make sure you complete the following selections
Full instructions and dimensions are shown below

 

 

Spindle length required    Please choose Short for a clock dial up to 3mm thick Medium for a clock dial up to 8mm thick Long for a clock dial up to 12mm thick Extra Long for a clock dial up to 16mm thick - £1 Extra each (only available with Ticking movements)

 

 

Please click here to view the hands you can choose from

 

Then click here and select your hands   Please select the hands you require 24mm black metal hands with black second hand 24mm black metal hands with red second hand 24mm gold metal hands with gold second hands 29mm black metal hands with black second hand 29mm black metal hands with red second hand 29mm gold metal hands with gold second hands 36mm black metal hands with black second hand 36mm black metal hands with red second hand 36mm gold metal hands with gold second hands 35mm black plastic hands with black second hand 35mm black plastic hands with red second hand 24mm black metal hands with black second hand 47mm black metal hands with black second hand 47mm gold metal hands with gold second hands 47mm silver metal hands with silver second hands 48mm black metal hands with black second hand 48mm black metal hands with red second hand 48mm gold metal hands with gold second hands 50mm black metal hands with black second hand 50mm black metal hands with red second hand 50mm gold metal hands with gold second hands 55mm black plastic hands 55mm white plastic hands 55mm red plastic hands 55mm blue plastic hands 55mm green plastic hands 55mm yellow plastic hands 55mm orange plastic hands 55mm pink plastic hands 56mm black plastic hands with black second hand 56mm black plastic hands with red second hand 60mm black metal hands with black second hand 60mm black metal hands with red second hand 60mm gold metal hands with gold second hands 65mm black metal hands with black second hand 65mm black metal hands with red second hand 65mm gold metal hands with gold second hands 73mm black metal hands with black second hand 73mm black metal hands with red second hand 73mm gold metal hands with gold second hands 76mm black metal hands with black second hand 76mm black metal hands with red second hand 76mm gold metal hands with gold second hands 80mm black plastic hands with black second hand 80mm black plastic hands with red second hand 80mm white plastic hands 80mm red plastic hands 81mm black plastic hands with black second hand 81mm black plastic hands with red second hand 86mm black metal hands with black second hand 86mm black metal hands with red second hand 86mm gold metal hands with gold second hands 86mm silver metal hands with silver second hands 89mm black metal hands with black second hand 89mm black metal hands with red second hand 89mm gold metal hands with gold second hands 95mm black metal hands with black second hand 95mm black metal hands with red second hand 95mm gold metal hands with gold second hands 98mm black metal hands with black second hand 98mm black metal hands with red second hand 98mm gold metal hands with gold second hands 110mm black metal hands with black second hand 110mm black metal hands with red second hand 110mm gold metal hands with gold second hands 110mm silver metal hands with silver second hands 119mm black metal hands with black second hand 119mm black metal hands with red second hand 119mm gold metal hands with gold second hands 119mm silver metal hands with silver second hands 130mm black metal hands with black second hand 130mm black metal hands with red second hand 130mm gold metal hands with gold second hands

 

 

Movement dimensions

70mm high (with hanger) x 55mm wide x 16mm deep (without spindle)

The hanger can easily be removed with a hacksaw if you do not have room for it

The height if the movement without the hanger is 55mm

Centre hole needed in dial 8mm to 10mm

 

 

Our Clock Movements are available in a choice of spindle lengths

The same fittings are used regardless of spindle length

Please click the pictures for a better view

Short spindle movements are ideal for dials up to 3mm thick

Medium spindle movements are ideal for dials up to 8mm thick

Long spindle movements are ideal for dials up to 12mm thick

Extra Long spindle movements are ideal for dials up to 16mm thick(£1 extra each) - Only available with Ticking Movements

You can choose any selection of spindle lengths you require

Ie.... 20 short 50 medium and 30 long spindle movements in a 100 pack

Please specify which spindle lengths you require when ordering

 

 

Movement fixing instructions

The brass thread is on the movement spindle which makes assembly of the clock
very easy and provides protection to the plastic spindle.

To make a clock simply drill an 8mm to 10mm hole in the dial.

Place the rubber washer (supplied) over the movement spindle and push the
spindle through the hole from the back of the dial

Place the brass washer (supplied) over the spindle. (This covers any small chips
or ragged edges around the hole

Then just tighten the brass nut (supplied) on the thread until the movement is held firmly.

Choose any selection of hands you require from theHANDS LIST

Push the hour hand then the minute hand and then the second hand on to the spindle making sure they all point to the 12

Put in the battery (not supplied but available at superb prices) and that’s it - your clock will start !

 

Tip from the ticknology dept !

We always supply a second hand with each clock movement

If you don't want to use a second hand just order a metal second hand, separate the aluminium second hand
from the brass bush and push the brass bush on to the second hand spindle to neatly cover the centre hole

 

 

IMPORTANT

OUR EZ Quartz

 

CLOCK MOVEMENTS AND HANDS ARE RoHS APPROVED !

Since 1st July 2006 clock movements and hands have to be RoHS approved

by law if you want to sell your clocks in the EEC

 

 

Click here to return to the main menu